12 lanes of 48 inch AMF flat gutters.
$ 75.00 each.
contact me at mcasey574@yahoo.com

I have a few 3QTs available and a nice QDAK box. Also have some 82-90XL silver 110v chassis available. Call 432-934-1881 and leave a message or email mechanic8230@yahoo.com...............I have T Vision cameras and boards also plus some All XL boxes.

Qubica Scoring For Sale





Contact For Pricing : Steve (518)588-2768

82/30 clutches for sale 24and95 volt 100.00 dollars each plus shipping call Mr.K at 513-206-0388 thanks.

For sale 10 ALL boxes interface quibica to Brunswick gsx
Eadgbe88@gmail.com
Must go ! Cheap!!!

LOOKING FOR 6 LANE,S OF 3/8 THICK BRUNSWICK GLOW ANVILANE WITH APPROACH,S can remove and pick it up anywhere in usa. 727-808-9354 dan email dynobowldan@aol.com

AS-80/90 parts available CHEAP!!
Offering a package deal, all boards,B/W lower monitors and scanner for a pair of lanes for $200.00 plus shipping.
Have 79 and 86 scanners.
352-223-1927

I have some 3QTs and a Q Dac unit available. Also some OH-RX boxes. Console heads available too. Email mechanic8230@yahoo.com or call 432-934-1881 and leave a message.

Have several Brunswick AS80/90 consoles available. 308-999-2304.

I have 2 used Gemini Silver Bullet LS/C lane machines for sale. One is for parts only and the can probably be fixed, but not sure what the issue is. It might be better to use it for parts, too. Best offer gets them. Thx. 803-286-0711.

Equipment For Sale



(3) Frameworx Ball Racks/Hood/Power Lifts : $800 ea
(14) Foul Units : $100 ea
(6) Zot Foul Units : $125 ea

Call : (518)588-2768

Brunswick Consolidated 1 CPU & 1 I/O board ( working) for sale email me Shaggyshawn74@yahoo.com

I have Steltronic Elix lane computers, cameras and IRETRO curtain wall boxes available. Make offer please. Also have 3 82-90xl silver 110v chassis available. Call 432-934-1881 and leave a message and I will call back or email mechanic8230@yahoo.com

Selling 8230 backend and combo motors.
35 combo motors at $50 a piece
20 backend motors at $100 a piece

Looking for 8 lanes of Brunswick Bankshot in Western Canada or Western USA
We will pick up.
Call or e-mail Ray: 250-753-2341 brechinlanes@gmail.com

QAMF Durabin for sale! Brand new still in box w/ all hardware. Asking $800 Through QAMF $950.00 Contact me @ 814-233-9944 or lincolnbowlingcentersllc@gmail.com

Qubica Flat Screen Conversion Boxes and camera parts.

Asking $300.00 each for the converters.

Call Eric @ 501-547-2997

Thanks!

Ad 1252 price for Kustodian plus is $7000.00

For sale Kustodian plus lane machine. Very good condition used in small center. 2006 mfg date. Pics available email mcasey574@yahoo.com

Looking for 3/4" plugs and 1/2" plugs for A1 Synthetic Lane Panels.

16 Lanes of Bankshot Bumpers - Asking $500.00 per lane.

Call Scott @ 816-390-5807

I have XLMP boxes, T Vision cameras and boards, Mark 5 MP chassis boards, All XL boxes, Super Touch key pads for BESX, HDs and hubs for BESX. A few 82-90 front and back end motors. Make me an offer. Call 432-934-1881 and please leave a message or email mechanic8230@yahoo.com

Qty 10 ALL boxes Brunswick gsx to Qubica scoring selling Eadgbe88@gmail.com

Looking for bowlers terminal board for xl
lowboy

Todd
570-449-9747

Removing 40 lanes of as-80/90 scoring, all equipment and spare parts available.
If interested call 3522231927. Chuck
79 & 86 scanners

Hi i am looking steltronic key pad circuit board and keypad and one approach panel for synthetic lane if any one have call me 416-899-6171 or email me harbirkahlon@gmail.com or any part for AMF chassis .any Good mechanic for AMF and Smith contect with me

Post 1243 Contact phone is 708-895-6633

Kegel Sanction Standard for sale. Just taken out of service at the end of our winter leagues last week (5/11/18). Have not had any problems, machine works great...we just wanted to go cordless and get ourselves a new Ikon. This machine had many parts replaced, was cleaned, and inspected in the summer of 2017 by Skip at Bob's Business. Has a few cosmetic paint issues from the years of use and the cord is probably ready to be replaced, but other than that machine is in great shape. Will come with all the spare parts we have for it. Asking $5,000 or best offer, just want to move along to a good home at a fair price. We are located in Lynwood IL, a south suburb of Chicago. We suggest pick-up only.

F boxes for sale 12 of them all working for GSX to Qubica. Name the price will sell separately
Eadgbe88@gmail.com ( cheap cheap)

Kustodian Plus for sale in excellent condition. Asking price is $ 9500.00. Ad 1248 wrong price Pics available contact mcasey574@yahoo.com